Switching on the function, Switching off the function, Holiday – Siemens KG49NSW31 User Manual
Page 31: Energy saving mode, Alarm function, Door alarm, Temperature alarm, Energy saving mode alarm function, En 31
en
31
Switching on the function
1. Press “setup” button 4 until
the required special function is
encircled.
2. Acknowledge the selection with
the setting button “+”.
When the function is switched on,
a triangle is indicated.
Switching off the function
To switch off, reselect the special
function with the “setup” button 4 and
press the setting button “-”. The triangle
behind the function disappears and is
therefore switched off.
“holiday”
If leaving the appliance for a long period
of time, you can switch the appliance
over to the energy-saving holiday mode.
The temperature of the refrigerator
compartment is automatically switched
to +14 °C.
Do not store any food in the refrigerator
compartment during this time.
Switching on the function
1. Press “setup” button 4 until
the required special function is
encircled.
2. Acknowledge the selection with
the setting button “+”.
When the function is switched on,
a triangle is indicated.
Switching off the function
To switch off, reselect the special
function with the “setup” button 4 and
press the setting button “-”. The triangle
behind the function disappears and is
therefore switched off.
Energy saving mode
When the appliance is not used,
the display on the controls switches
to energy saving mode.
Only the required lamps are lit with
reduced luminosity.
As soon as the appliance is used, e.g.
the door is opened, the display switches
back to normal illumination.
Alarm function
In the following cases an alarm may be
actuated:
Door alarm
The door alarm switches on if an
appliance door is left open for longer
than one minute. Close the door to
switch off the warning signal.
Temperature alarm
The temperature alarm switches on if
the freezer compartment is too warm
and the frozen food is at risk of thawing.
“AL” flashes on the display 3
and “alarm” is displayed.
When the alarm button "/9 is pressed,
the freezer compartment display "/3
indicates for 10 seconds the warmest
temperature reached in the freezer
compartment.
Then this value is deleted. The freezer
compartment temperature display "/3
then indicates the set temperature.