Siemens KG49NVI20 - Manual (Page 28)

en
28
Switching on
the appliance
Switch on the appliance with the On/Off
button "/1.
A warning signal sounds. Alarm
button "/2 flashes.
Press the alarm button "/2. The
warning signal switches off.
The alarm button "/2 remains lit until
the set freezer compartment temperature
has been reached.
When the door is open, the light in the
refrigerator compartment is lit.
The factory has recommended
the following temperatures:
■
Refrigerator compartment: +4 °C
■
Freezer compartment: –18 °C
Operating tips
■
When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
■
The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
■
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button 7 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 8.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Perishable food should not be stored
above +4 °C.
Freezer compartment
The temperature can be set from -16 °C
to -24 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 5.