Kenwood DDX5901HD - Manual (Page 5)

ENGLISH 5
INITIAL SETTINGS
3
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for .
Clock settings
1 Display the screen.
On the source control screen:
2 Display the screen.
3 Display the screen.
4 Set the clock time.
System> Synchronizes the clock time with
FM RBDS.
Sets the clock manually. (See
below.)
When selecting :
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to “00”.
5 Finish the procedure.
DDX_Mid_K.indb 5 2014/01/23 15:45