Kenwood DDX5901HD - Manual (Page 44)

44
SETTINGS
Settings for using applications of
the iPod/iPhone/Android
Before using applications of the iPod/iPhone/
Android such as Pandora or iHeartRADIO, select the
device to use and connection method.
When connecting the device for first time, the
setup screen (for connection, etc.) appears. Follow
the procedure on the setup screen to configure
the settings.
1 Pair the iPod/iPhone/Android device
through Bluetooth. (Page 36)
2 Display the screen.
On the screen:
• If [Enter] for cannot be
selected, put the unit in standby. (Page 7)
3 Display the
screen.
4
• If you do not need to change the setting,
press [OK] to exit from the setup screen.
5 Select the device type (1), then press
[Next] (2).
6 Select the connection method (1), then
press [Next] (2).
For Android:
+ Bluetooth>
Select this when the Android
is connected both by cable to
HDMI/MHL input terminal and
via Bluetooth.
Select this when the device is
connected via Bluetooth.
For iPod/iPhone:
AV-IN>
Select this when the iPod/
iPhone is connected using
KCA-iP202 (optional accessory).
Select this when the iPod/
iPhone is connected using USB
2.0 cable (accessory of the iPod/
iPhone).
Bluetooth> Select this when the iPod/
iPhone is connected using
HDMI cable KCA-HD100
(optional accessory) and USB
2.0 cable (accessory of the iPod/
iPhone) through Lightning-
Digital AV adapter (accessory of
the iPod/iPhone).
Select this when the iPod/
iPhone is connected via
Bluetooth.
• When selecting or
Wire>, go to step 8.
7 When selecting or
as the connection method,
the device selection screen appears.
Search for the available iPod/iPhone
devices (1), select the target device from
the list (2), then press [Next].
• You can change the page to display more
items by pressing [J]/[K].
• If the device is already listed, skip the step 1.
• To stop searching, press [Cancel].
8 Confirm the settings.
DDX_Mid_K.indb 44 2014/01/23 15:45