Kenwood DDX5901HD - Manual (Page 45)

ENGLISH 45
SETTINGS
Sound ad justment
❏ Using the sound equalization
• The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD/DVD-VR/VCD
– CD
– DivX/MPEG1/MPEG2/H.264/WMV/MP3/WMA/
WAV/AAC/FLAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1 Display the screen.
On the screen:
2 Select a sound mode .
• You can change the page to display more
items by pressing [J]/[K].
• You can also display the screen by
pressing AUD (for DDX8901HD/DDX7701HD/
DDX7071BT ) or by pressing and holding the
Volume/ATT/ AUD knob (for DDX5901HD ) on the
monitor panel.
Storing your own adjustment—Adjusting the
sound precisely
1 Select a sound mode. (See the left column.)
2 Select a band and adjust the level of the
selected band.
• The number of bands depends on the model.
• You can adjust the level by dragging the
control or using [J]/[K].
• Repeat this step to adjust the level of other
bands.
The adjustments are stored and is
activated.
3 Activate ([ON]) or deactivate ([OFF]) the
bass () (1), and then adjust
the subwoofer level (2).
❏ Setting the car type and speakers
1 Display the screen.
On the screen:
• Press [K] repeatedly to change the page on
the menu screen.
2 Select a car type (1), and then select the
location of the speakers (2).
DDX_Mid_K.indb 45 2014/01/23 15:45