Notifier Combustible Gas Monitor - Manual (Page 2)

E 3 Point Toxic and
Combustible Gas
Monitor
E 3 Point goes beyond protection to offer your
building greater performance and productivity.
Reflex ® Keeps You Safer
Only Honeywell’s patented Reflex ® technology
adds this extra degree of precision and diligence
to sensor monitoring to make doubly sure you’re
safe. Reflex bounces electrical signals into the
E
3 Point electrochemical sensor cell at regular
intervals, a form of electronic bump testing and
continuous monitoring of cell response.
Oscilloscope graph shows cell responding
to Reflex pulse, indicating sensor condition.
Ergonomic
features built into
E 3 Point include a
hinged door for
maintenance ease.
GREEN shows optimal sensor condition
(dynamic responsiveness to gas).
RED shows degraded sensor condition
(indicating cell dry-out or failure).
Flexible Operation
• Comes in standalone, standalone with remote
(dual gas mode) or network versions
• Connects to analog or digital systems
• Works with virtually any BAS including BACnet,
Modbus or LonWorks*
• Connects to wired or wireless system
(via 301CW wireless controller)
• Wall or duct mount
• Factory-calibrated cartridges
Cost Effective
• Saves energy through Demand Control
Ventilation (DCV)
• Simplifies installation/maintenance through
plug-n-play sensor
• Remote sensor option provides dual gas
monitoring (standalone version only)
• Optimizes BAS, fire, ventilation
and other security systems
Versatile Communications
• Works through BAS to improve fault
diagnostics and collect data on gas
concentation levels, sensor condition, etc.
• Couple with 301C to log data and
daisy-chain up to 96 E 3 Point units
Advanced Sensing Technology
• Detects CO, NO
2
, O
2
, H
2
, H
2
S, CH
4
, C
3
H
8
• Advanced electrochemical (for toxic gases)
and catalytic bead (for combustible gases)
sensor performance
• Uses patented Reflex
® and smart
cartridge technologies
Range of Accessories
• Factory-calibrated replacement cartridges
• Power transformer
• Vandal-resistant steel wire detector guards
• Tamper-proof screws
• Horns and strobes
Electrical Certifications
• US (ANSI/UL 61010-1)
• Canada (CSA C22.2 No. 61010-1)
* pending - call your sales rep for information
Plug-N-Play Ease
E 3 Point’s plug-n-play sensor is factory
calibrated and works out of the box. Upon
installation, E
3 Point automatically configures
for quick operation. You benefit from easier
installation and maintenance, and greater
adaptability to changing building
and safety requirements.
Efficient
Operations
Smart sensor design,
extreme temperature
range, etc. optimize
building performance
+ Energy
Savings
On-demand
ventilation controls
energy use
+ Economical
Value
Reduces cost of
installation, operation
and maintenance
= E 3 Point
Main Unit
Remote Unit
Plug-N-Play
Sensor Cartridge