Triton Navigation - Manual (Page 13)

Page 10
3.0 Processing Workflows
3.1 Process from File Tree (Sidescan, Bathymetry & Subbottom)
Upon import of the raw survey data, the navigation can be processed using the Process
Navigation dialog available from the File Tree.
File Tree Processing Steps:
1. Import Raw Data
2. Select Show Beamlines for at least one of the data files to be processed.
3. Use the Zoom toolbar button to zoom into the Beamlines enough to monitor
the processing results
4. Right-click on a navigation layer to process the navigation data
 on the root nodes in the Navigation tree for processing all files in that
node at one time, recommended unless from different sonars or have
discreet navigation problem areas
 on individual lines within the root nodes in the Navigation tree for
processing navigation for only that file
5. Click on the Filter Setup button to open the Boxcar Settings dialog, make
changes to the settings
6. Set the Number of Iterations = 1 to monitor each step of the processing
7. Close the Boxcar Settings and click Process to initiate the first run through the
navigation processing, review results by looking at the beamlines in the
Perspective map view
8. Click Process to run through the navigation processing again.
9. Repeat until the results are good
10. In the sidescan and bathymetry data processing wizards, make sure the
Navigation Processing checkbox is set to Use Processed Navigation!