Videoswitch Vi-R3000 Series - Manual (Page 36)

Vi-R4000 Series
Videoswitch Page 31 Mdr603a.doc
• An alarm such as movement detection or external alarm input
• An exception such as a hard drive failure.
4.1.5.2 Red Cross
A red cross indicates that recording has stopped on that camera. This may be due to a variety of
reasons, including:
• Time is outside programmed schedule
• Recording has been manually stopped
• Camera is faulty
• Hard drive is faulty
• Network problem (if IP camera)
4.1.6 Quick setting Toolbar
If you right-click on the mouse (or mouse emulator) in Live mode, you will see this toolbar.
This provides these functions (in order):
Enable manual record If schedule is inactive, record may be manually enabled or disabled
Instant playback Instant Playback only shows the last five minutes recorded
Mute audio Mute/Enable audio
Capture an image Take a snapshot of the current image
PTZ control Control dome via keyboard
Digital Zoom Left-click and draw to select the area for zooming
Image settings Adjust image appearance
Close toolbar Close this toolbar