1 password access, 1 keyboard mode, 2 mouse – Videoswitch Vi-R3000 Series User Manual
Page 16: 3 mouse emulator mode, 4 default passwords, Vi-r4000 series

Vi-R4000 Series
Videoswitch Page
11
Mdr603a.doc
3.1 Password Access
If password protection is enabled, a password will need to be selected to gain access to protected
functions such as the menu. When the password box appears, enter the password using one of these
methods:
3.1.1 Keyboard
Mode
• If you want to select a different User Name press arrow keys to highlight User Name field,
press OK, press down arrow, press OK again.
• Press arrow keys to select Password field
• Press
EDIT
key to enter edit mode
• Enter the password using 0-9 keys
• Press
OK
• Press arrow keys to select OK on screen
• Press
OK
3.1.2 Mouse
•
Click on user name if you wish to change it and select another use
•
Click on password field, enter password numbers and click on ENTER.
• Click
on
OK
3.1.3 Mouse Emulator Mode
This is the same as using a mouse, except the up, down, left, right keys are used to move the mouse
pointer and the OK keys act s as a left mouse click.
•
Click on user name if you wish to change it and select another use
•
Click on password field, enter password numbers and press OK while on ENTER.
• Click
on
OK
3.1.4 Default
Passwords
The DVR is shipped with default users and passwords pre-configured as shown in this table (note
Username is case sensitive). Access rights may be changed and other users may be added when
logged in as admin. Default settings may be restored in Menu->Maintenance->Default
Username
Default Password
Access Rights
admin
12345
Access to everything for system configuration
User1
111111
Full local and remote access and configuration
User2
222222
Local and remote viewing, playback and export.
User3
333333
Local viewing, playback and export
User4
444444
Local manual operation of cameras