Led mirror – Ronbow 600823 User Manual
Page 2
Rev. Oct, 2013
ronbow.com
INStALLAtION GUIDe
INStALLAtION SHeet
ACCESSORIES
MODEL: 600823
601224
602523
LED MIRROR
STEP2:
Drill pilot holes into the wall.
See Figure 2.
figure 2.
Pilot Holes
figure 3.
STEP 4:
If the mirror is not flush to the wall it is
recommended to cut the plug and hard wire to the
house. In this case we recommend a licensed
electrician.
See Figure 3.
Note: It is recommended you have a wall outlet within the
recessed area so the mirror can be flush against the wall.
Wall
Recessed
Area
Wall
Outlet
Mirror
STEP 3:
Secure the anchors in the wall, and then
fasten the screws provided into the anchor.
Note: Allow about 1/8” clearance from screw head to wall.
STEP 5:
Line up the keyhole hardware on the back
of the mirror to the screws on the wall, and allow the
mirror to sit in place.
See Figure 4.
figure 5.
Wall
Anchor
Mirror
Screw
Wire