Ronbow 436637 - Manual

Installation Sheet
www.ronbow.com
Step 2 :
Step 4 :
Ronbow Corporation, All Rights Reserved.
Glass Vessel
Model:
Step 3 :
Step 5 :
Position and set vanity top on cabinet
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
See Figure 2.
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Attach p-trap to tailpiece.
Figure 1.
Figure 2.
Figure 3.
Step 1 : Screw in 4 countertop spacers into
the holes provided on top of the
cabinet
See Figure 1.
436624
436632
436637
Tempered Glass Sinktop
24”/32”/37”
1
1
Drain Cap
Metal Nut
Thick rubber
washer
Tailpiece
Drain Nut
Tailpiece
Thick rubber
washer
P-trap
Drain