Ronbow 200271 - Manual

RONBOW CORP INSTALLATION GUIDE ronbow.com
INSTALLATION SHEET
ABOVE COUNTER SINKS MODEL: 200271 217732
217724 217737
CERAMIC VESSEL
STEP 1: Place adhesive around top of cabinet
OR
Position countertop opening to ensure
clearance between the lavatory, faucet and
backsplash.
Note: If using a custom top, position and drill a 7
inch hole in the counter top.
See Figure 1.
Figure 1.
MATERIALS NEEDED:
PHILIP SCREWDRIVER
PLUMBERS' PUTTY/ SEALANT
STEP 2: Place a generous portion of plumb-
ers' putty under drain cap and insert whole
drain body inside the bowl and through the
countertop.
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers' putty in-
stead.)
See Figure 2.
Figure 2.
STEP 3: From under the drain, insert the thick
rubber washer and screw on and tighten the
metal nut. Remove excess plumbers' putty.
See Figure 3.
Figure 3.
STEP 4: Attach p-trap to tailpiece.
Note: For ceramic sinks with overflow & faucet deck
Drain Cap
Thick Rubber
Washer
Metal Nut
Overflow Hole
Tailpiece
Drain
Thick Rubber Washer
Drain Nut
Tailpiece
P-Trap