Ronbow Cami - Manual

Installation Sheet
www.ronbow.com
Ronbow Corporation, All Rights Reserved.
CAMI
18”
Model: 036918
Contempo Collection
Note : For installing above counter sink.
DO NOT USE any adhesives with silicone.
Silicone will bond to the decorative finish
and cause permanent damage.
Step 1 :
Step 2 :
Step 3 :
Position and drill a 1-3/4” hole for the
drain on the countertop. Place mounting
ring under the sink as shown on the
right
Drain assembly picture
Place a generous portion of plumbers’
putty under drain cap and insert whole
drain body inside the bowl and through
the countertop
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
From under the drain, insert the thick
rubber washer and screw on and tighten
the metal nut. Remove excess plumbers’
putty and attach p-trap to tailpiece
Step 4 : Secure top & back splash to cabinet by
using adhesive caulk
Mounting Ring Detail
Vertical view Horizontial view
Rubber
washer
Mounting ring
Bottom O-Ring
Rubberw asher
Mounting Ring
Countertop
Metal Nut
Thick rubber
washer
Tailpiece
Drain Cap
Mounting Ring
Drain
Metal Nut
Tailpiece
P-trap
Thick rubber
washer