Ronbow 200032 - Manual

Installation Sheet
www.ronbow.com
Step 1 :
Step 3 :
Ronbow Corporation, All Rights Reserved.
Ceramic Vessel
Model: 200032
Step 2 :
Step 4 :
Position countertop opening to ensure
clearance between the lavatory,
faucet and backsplash. Cut 4” hole in
countertop. Position and set sink and
seal with silicone
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
See Figure 2.
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Attach p-trap to tailpiece
Above Counter Sinks
Note : For Ceramic Sinks without overflow Figure 1.
Figure 2.
Figure 3
countertop
Drain
Drain Nut
Tailpiece
Thick rubber
washer
P-trap
Drain Cap
Metal Nut
Thick rubber
washer
Tailpiece