HighPoint RocketRAID 2522 - Manual (Page 77)

Mac OSX Driver and RAID Management Software
9) Click Create. If you have specified an initialization option, the initialization
process will start automatically.
Deleting an Array
To delete an array:
1) Select “Manage - Array” from the menu.
2) Click on the Maintenance button. An Array Information window will appear.
3) Click the Delete button.
Note: An array in use by the operating system cannot be deleted. Any data stored on
a deleted array will be inaccessible.
Adding Disks to an Array
When an array member in a redundant array fails, the array will be listed as broken. A
broken array will be automatically rebuilt using available-spare disks. However, if you
have no spare disks configured, you can still rebuild by manually adding an Available
Disk to the array. To add a disk to a broken array:
1) Select menu “Manage - Array”.
2) Click the Maintenance button.
3) Click the Add Disk button.
4) If the disk is successfully added to the array, rebuild process will start
automatically.
7-5