beautypg.com

3 - updating the driver, 4 - uninstalling the driver – HighPoint RocketRAID 2522 User Manual

Page 71

background image

FreeBSD Driver Support

Step 4 Configure the System to Mount Volumes at Startup

Instruct the system to automatically mount the array by modifying the file /etc/fstab.

Example: Add the following line to instruct the system to mount /dev/da1s1e to

location /mnt/hpt after startup:

/dev/da1s1e /mnt/hpt ufs rw 0 0

3 - Updating the Driver

To update the driver with a newer revision, simply reinstall the driver following the

steps discussed in the previous section, “Install the driver on an existing system”.

4 - Uninstalling the Driver

The driver can only be uninstalled when the system is not booting from devices

attached to the RocketRAID host adapter. To uninstall, remove the line

rr2522_load=”YES” located in /boot/defaults/loader.conf, and then delete the driver

module /modules/rr2522.ko or /boot/kernel/rr2522.ko.

6-7