HighPoint RocketRAID 2522 - Manual (Page 69)

FreeBSD Driver Support
Alternately, it is possible extract the files from the .img files directly, without using a
floppy diskette:
For FreeBSD 4.x:
# vnconfig vn0c freebsd_xxx.img
# mount /dev/vn0c /mnt
# cp /mnt/rr2522-xxx.ko /modules/rr2522.ko
# vnconfig –du vn0c myfilesystem mount=/mnt
For FreeBSD 5.x:
# mdconfig –a –t vnode –f freebsd_5.x.img –u 0
# mount /dev/md0 /mnt
# cp /mnt/rr2522-xxx.ko /boot/kernel/rr2522.ko
# umount /mnt
# mdconfig –d –u md0
Step 2 Test the Driver Module
Test the driver module to ensure that it works with the system, by loading it during
bootup. If the module has been loaded successfully you should see the RocketRAID
banner and a display screen of the attached drives. You can now access the drives as
a SCSI device.
Note: If you have no other SCSI device, the first device is /dev/da0, then /dev/da1,
etc.).
Example: F1 FreeBSD
Default: F1
>> FreeBSD/i386 BOOT
Default: 0:ad(0,a)/boot/loader
boot:
BTX loader 1.00 BTX version is 1.01
Console: internal video/keyboard
BIOS driver A: is disk0
BIOS driver C: is disk2
BIOS 636kB/74512kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(mailto:[email protected], Sat Apr 21 08:46:19 GMT 2001)
6-5