Vaisala WAC155 - Manual (Page 19)

Chapter 3 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 17
0702-001 Figure 5 WAC155 Component Board
Connections
The WAC155 transmitter provides the line cable entry through a gland
for a cable with a diameter from 7 to 10 mm. For better protection
against RF interference, bend the cable shield as illustrated in
Figure 6
on page 17 .
0206-046 Figure 6 Cable Shield Bent over the Plastic Sleeve and O-ring
The WAC155 transmitter has three I/O connectors as shown in
Figure 7 on page 18 . For the location of the connectors and the routing
of the cables through the cable glands, refer to Figure 8 on page 20 .
The following numbers refer to Figure 5 on page 17 .
1 = RS-485 termination jumper
2 = Status indicator LED