Anthem Audio AVM 50 - Manual (Page 29)

21
Example 1: Select a Source for the ZONE2 Timer:
• Enter the Setup Menu. Go to ‘2. SET TIME / TIMERS’ and press SELECT.
• Press the button until you reach ‘f. SET ZONE2 TIMERS’.
• Press SELECT. The ‘2f. SET ZONE2 TIMERS’ submenu will appear.
• Press the button until you reach ‘e. SOURCE’.
• Use the buttons to change to desired Source.
• Press BACK to leave this submenu and return to the SET TIME/TIMERS menu.
To have the Timer turn on to a Preset Station, do the following from the ‘e. SOURCE’ menu line:
(setting Preset Stations is explained in section 4.4.1)
• Use the buttons to change to ‘Last Stn’.
• Press SELECT to highlight ‘Last Stn’.
• Use the buttons to change to the desired FM • AM Preset. These will scroll from ‘AM 1-1’ to
‘AM 1-6’ then from ‘FM1-1’ to ‘FM3-6’ and back to ‘Last Stn’.
• Press BACK once you have selected a preset.
The Timer submenu setup procedure is the same for MAIN, ZONE2, and ZONE3.
Example 2: Change ZONE2, TIMER2 to come on Weekdays at 7:30 AM.
• Enter the Setup Menu. Go to ‘2. SET TIME/TIMERS’ and press SELECT.
• Press the button until you reach ‘f. SET ZONE2 TIMERS’.
• Press SELECT. The ‘2f. SET ZONE2 TIMERS’ submenu will appear.
• Press the button to reach ‘h. TIMER 2’.
• Use the buttons to change to ‘Week’.
• Press the button until you reach ‘i. WEEKDAY ON’.
• Press SELECT. The hour is now in red, use the Master Control Knob or the buttons to set the
hour to ‘7’ AM. (Continuing through ‘12’ will advance the AM/PM settings.)
• Press the button. ‘00’ minutes will be highlighted.
• Use the Master Control Knob or the buttons to set the minutes to ‘30’.
• Press BACK to leave this submenu and return to SET TIME/TIMERS menu.
When scrolling between ‘11 PM’ and ‘12 AM’ settings, the display shows ‘--:--’. Timers set in the ‘--:--’
position will be skipped. Thus, to set the Timer to only turn on, set the Off time to ‘--:--’. To set the Timer
to only turn off, set the On time to ‘--:--’.
3. SETUP MENU
continued …