Pop & Lock PL1050 - Manual

2.
Squeeze the top edge of the black
plastic insert down to release the
top two locking tabs
3.
Remove the insert by pivoting it
on the bottom edge.
4.
Place the insert back hooking it
along the top edge leaving the
bottom edge sticking out.
5.
Lift the handle and insert the
POP&LOCK with the lock in the
unlocked position.
Contents:
Lock Assembly, 2 keys
1/4-20 One-Way Screw
1/4-20 Hex Bolt
Big Washer
Instructions, Warranty Card
Tools Required:
3/16 Allen Wrench or # 30 Torx
7/16 Socket or Adjust. Wrench
Tech Support:
Call 1-800-342-5911
For the latest instructions please
visit www.popandlock.net
6.
Insert the 1/4-20 Hex bolt and the
big washer on the backside of the
tailgate and capture the POP&LOCK
with a few turns.
Note: Do not over-tighten screw.
7.
Push the black plastic insert in fully
and tighten the mounting screw.
Installation Instructions
Tailgate Lock PL1050 Chevy CK/GMC Sierra 1988-1998
1.
Unscrew the single lower handle bolt.
Note: Bedliner panel may have to be
removed.
12-27-11