Firmware revision, Default settings and ranges, Ee table 12 b – Outback Power Systems GS8048 Operator Manual User Manual
Page 49: E 47.), E 47), Specifications, Ieee
Specifications
47
The acceptance ranges are selected using the system display. In the MATE3, the options are
IEEE
and
user.
The
IEEE
option allows a range of 108 – 132 Vac at 59.3 – 60.5 Hz
The
user option does not have a fixed voltage setting. It follows the upper and lower limit settings in the
Grid AC Input Mode and Limits menu. The default is a range of 108 – 132 Vac.
Reconnection delay is 6 seconds. Sell delay is 5 minutes. These settings are not adjustable.
Firmware Revision
This manual applies to Radian series inverter/chargers with a firmware version of 001.004.xxx
or higher.
Default Settings and Ranges
Table 12 GS8048 Inverter Settings
Field
Item
Default
Minimum
Maximum
INVERTER
Hot Key Inverter Mode
Off
On, Off, or Search
CHARGER
Hot Key Charger Control
On
On or Off
AC Input
Hot Key
AC Input Mode
Use
Drop or Use
Search
Sensitivity (see page 16 for increments)
10
0
250
Pulse Length
8 AC cycles
4 AC cycles
20 AC cycles
Pulse Spacing
60 AC cycles
4 AC cycles
120 AC cycles
AC Input and
Current Limit
Input Priority
Grid
Grid or Gen
Grid Input AC Limit
50 Aac
5 Aac
55 Aac
Gen Input AC Limit
50 Aac
5 Aac
55 Aac
Charger AC Limit
30 Aac
0 Aac
30 Aac
Grid AC Input
Mode and Limits
Input Mode
Grid Tied
Generator, Support, Grid Tied, UPS, Backup,
Mini Grid
Voltage Limit Lower
108 Vac
70 Vac
110 Vac
(Voltage Limit)Upper
132 Vac
125 Vac
140 Vac
Transfer Delay
6 AC cycles
0 AC cycles
240 AC cycles
Connect Delay
0.2 minutes
0.2 minutes
15 minutes
Gen AC Input
Mode and Limits
Input Mode
Generator
Generator, Support, Grid Tied, UPS, Backup,
Mini Grid
Voltage Limit Lower
108 Vac
70 Vac
110 Vac
(Voltage Limit) Upper
140 Vac
125 Vac
140 Vac
Transfer Delay
6 AC cycles
0 AC cycles
240 AC cycles
Connect Delay
0.5 minutes
0.2 minutes
15 minutes
AC Output
Output Voltage
240 Vac
220 Vac
260 Vac
Low Battery
Cut-Out Voltage
42 Vdc
36 Vdc
48 Vdc
Cut-In Voltage
50 Vdc
40 Vdc
56 Vdc
Battery Charger
Absorb Voltage
57.6 Vdc
52 Vdc
64 Vdc
(Absorb) Time
1.0 hours
0.0 hours
24.0 hours
Float Voltage
54.4 Vdc
48 Vdc
60 Vdc
(Float) Time
1.0 hours
0.0 hours
24.0 hours
Re-Float Voltage
50 Vdc
48 Vdc
52 Vdc
Battery Equalize
Equalize Voltage
58.4 Vdc
56 Vdc
68 Vdc
(Equalize) Time
1.0 hours
0.0 hours
24.0 hours
Auxiliary Output
Aux Control
Off
Off, Auto or On