Night Owl STA-44 - Manual (Page 57)

56
16.3 PTZ Quick Functions
Use the PTZ Quick Functions to control a connected PTZ camera (not
included).
To access the PTZ Quick Functions right click anywhere on the screen with
the mouse and then select PTZ, or Start Cruise.

This will allow you go to a specific preset point.

This will allow you configure a set of specific preset points of
a PTZ camera.
1. Select a camera you desire to set a preset point;
2. Adjust the camera in a desired direction
3. Click [Set] to set the point as preset point
4. Click [Save] to save the preset point
5. Follow the above steps to add one more preset point.

This will allow you delete one selected preset.

This will allow you save relative parameters

This will allow you exit PTZ control interface
Start Cruise
When the Cruise Settings are configured, use the Start Cruise option on
the Quick Functions Menu to start the cruise. This just means that the
camera will constantly rotate.
Chapter 16 Camera Menu