Night Owl STA-44 - Manual (Page 34)

33
12.6 Maintain Menu
Use the Maintain Menu to update the system
’s firmware, restore factory
default settings, and set an automatic system reboot schedule.
To access the Maintain Menu select System from the Main Menu, and then
select Advanced from the System menu, then select Maintain from the
Advanced menu.

Auto Maintain: With this option enabled, the DVR will reboot
automatically on a specified schedule to help prevent system and
hard drive failure and to preserve the life your DVR.

Auto Reboot: Choose when you would like your system to
automatically reboot.

Firmware Update: This button is used to perform a firmware update
from a USB flash drive.

Load Defaults: This will open a submenu that will allow you to
choose which menus to load factory default settings.

Reboot: Reboots the DVR.

Power Off: This will turn the DVR completely off.

Log: This will open a submenu that lists all actions of the DVR.
Chapter 12 System Menu