Night Owl LTE-168500 - Manual (Page 9)

8

Use provided power adapter.
Do not use this product with a power source that applies more than
specified voltage (100-240V AC).

Never insert metal into the DVR case or its openings.
Inserting metal into the DVR case may cause electric shock.

Do not operate in wet or dusty area.
Avoid placing the DVR in areas such as a damp basement or dusty
attic.

Do not expose the DVR to rain or use near water.
If the DVR accidentally gets wet, unplug it and contact technical
support immediately.

Keep product surfaces clean and dry.
To clean the outside case of the DVR, use a lightly dampened cloth.
Do not use any cleaning solutions or solvents.

Do not install near any heat sources.
Do not install the DVR near any heat sources such as Stoves, heat
registers, radiators, other apparatus (including amplifier) that produce
heat.

Unplug the DVR when moving the device.
Be sure that the DVR is unplugged before you try to move the device.
When moving this device, be sure to handle it with care.

Make sure there is good air circulation around the unit.
This DVR system uses an internal hard drive, which generates heat
during operation, for video storage. Do not block vents on the DVR
that reduce the generated heat while the system is running. Place this
product in a well-ventilated area.
Chapter 4 Safety Instructions