Night Owl LTE-168500 - Manual (Page 65)

64
4. Find the IPv4 Address (or may be named IP Address in some
versions of Windows).
5. Change the last digits to 150. Example, you wrote down the IP
Address 10.1.10.11. When the last digits are changed the IP
address will now be 10.1.10.150.
6. Write this number down on a piece of paper. This IP Address is
what you will use as the IP address of your DVR in the next section.
7. Find the Default Gateway.
8. Write down the Default Gateway number. This is the IP address of
your router. Y
ou will need to enter this in the DVR’s network
settings for it to work properly.
Chapter 18 Remote Access