Night Owl LTE-168500 - Manual (Page 44)

43
13.3 Alarm Setup Menu
Use this menu to configure the alarm, pre-recording and post recording
settings.
To access the Alarm Setup menu select Record Functions from the Main
Menu, and then Alarm from the Record Functions menu.

Buzzer: This will enable/disable a beeping sound from the DVR if
alarms have been detected.

MD Alarm: Select each box for each action that you would like to
happen when motion has been detected. The first box will be for
the buzzer, the second box will be for email alerts, and the third box
will enlarge the channel to a full screen.

HDD Loss: This will enable the buzzer if the box is checked and the
buzzer is on if the hard drive fails.

HDD Space: This will enable the buzzer if the box is checked and
the buzzer is on if the hard drive is full and not set to overwrite.

Video Loss: This will enable the buzzer if the box is checked and
the buzzer is on if there is video loss on any channel.

Post Recording: Select the duration that the DVR will record after
an alarm is triggered.

PreRecord: Your DVR will temporarily store the five seconds of
video before any alarm is triggered. Enable this option if you would
like those five seconds to be saved to your hard drive.
Chapter 13 Record Functions Menu