GReddy TURBO KITS: Scion FR-S 2013-14 / Subaru BRZ - Manual (Page 13)

―１１―
〈Parts №１４，１５〉
(2) Install the factory oil switch onto the 3 way fitting
as shown in the diagram.
※ Be sure to use thread seal.
(3) Install the 1/8PT - 1/8PF 90 degree elbow fitting
on the opposite side of the Oil Pressure Switch as
shown in the diagram.
※ Insert 1/8PT portion in to the 3 way fitting.
※ Be sure to use thread seal.
〈Parts №１６〉
(4) Reconnect the Oil Pressure Switch Harness.
(5) Install the Banjo Bolt and crush washer as shown
in the diagram.
※ Be sure that the 1/8PT side faces towards the
front of the vehicle.
Oil leaks can cause engine bay fires
that can lead to bodily harm. Be sure
to install and secure the oil feed
line 。
〈Parts №１２，１３〉
№16
1/8P
F
1/8P
T
№12
№13