GReddy INTERCOOLERS: VW Golf IV 1998-01 / Type31V - Manual (Page 7)

３ ３ ３ ３－ － － －４ ４ ４ ４ Intercooler in Intercooler in Intercooler in Intercooler installation stallation stallation stallation
（１） Install the intercooler bracket as shown using the provided spacer between the body and bracket.
〈Parts used ♯１１．１２〉
（２） Install the intercooler to the bracket as shown.
〈Parts used ♯１．１４．１６〉
(3) Install the thrust sensor as shown, using the provided bolt and washer.
※There are two types of thrust sensors. If the sensor is too small for the hole, use the provided adapter to place in
between the sensor and intercooler. Lightly coat the outside of the adapter with silicone sealant before installing.
Adapter