GReddy INTERCOOLERS: Mitsubishi Evolution 2001-07 / Type32R - Manual (Page 6)

6
（３） （２）
Disconnect the hose shown in the image
with an arrow from the factory hard line. Use
the provided 10mm aluminum tube union to
connect the 960mm hose to the factory rubber
hose in this location. Secure both ends with
hose clamps. Use the 1070mm hose to
connect to the factory hard line at this location
and secure the end with a hose clamp.
(Parts used:
９
,
１６
,
１８
,
１９
)
３ ３ ３ ３－ － － －２ ２ ２ ２
Intercooler Mounting
（１）
Please remove the air guides depicted in the
image by the arrows.
（２）
Install the bracket as depicted by the arrow.
(Parts used:
１２
)