GReddy AIR INTAKE SYSTEMS: Subaru WRX STI 2008-12 - Manual (Page 2)

Installation will require the following tools:
Flat head & Phillips screwdriver, Vice grip, Pliers, 8mm socket, 10mm socket, Ratchet & 5/16 nut driver.
Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public
streets or highways is strictly prohibited in California and others states that have adopted California
emission regulations.
• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 949-588-8300.
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
• Disconnect the negative battery terminal before proceeding.
• Retain factory parts for future use.
Page 2
Label Qty. Description Part Number
A 1 Pro Dry S Air Filter 61-90135
B 1 Housing 05-T4301B2
C 1 Intake Tube 05-T4301P1
D 1 Hump Coupling 05-00564
E 1 Straight Coupling 05-01029
F 2 Clamp #44 03-50019
G 2 Clamp #48 03-50007
H 1 Adaptor 05-01037
I 2 Trim Seal (1-17") (1-20") 05-00072
J 3 Button Head Screws 03-50102
K 2 Cheese Head Screws 03-50030