beautypg.com

Refer to figures k & l for steps 22-26, Figure l – GReddy AIR INTAKE SYSTEMS: Honda Civic Si 2006-11 (CAI) User Manual

Page 15

background image

Refer to Figures K & L for steps 22-26

Step 22: Connect the vacuum hose C from the GReddy tube to the crank case. Use the clamp J to

tighten on the intake side

Step 23: Connect the vacuum hose D from the GReddy tube to the vacuum port. Use the clamp K to

tighten on the intake side

Step 24: Install the pre-filter onto the filter.

Step 25: Install the filter onto the GReddy tube. Do not push the filter too far onto the tube.

Step 26: Re-install the battery tray, battery, and reconnect your MAF sensor. Make sure everything is

tightened.

Figure L

GReddy.com

Page 15

See also other documents in the category GReddy For the car: