GReddy AIR INTAKE SYSTEMS: Honda Accord 4cyl. 2013-14 - Manual (Page 4)

Refer to Figure A for step 1-6
Note: Make sure car is cool before starting this installation to avoid coolant burns.
Step 1: Unplug the MAF sensor, then remove the wire harness from the OE air box 1 .
Step 2: Disconnect the crank case line from the OE tube 2 .
Step 3: Loosen the clamp connecting the OE tube to the throttle body 3 .
Step 4: Remove the two bolts holding the OE air box 4 .
Step 5: Pull out your OE air intake system out of your engine bay 5 .
Step 6: Remove the small engine cover on the side of your engine bay 6 .
REMOVAL
Page 4
1
2
3
4
4
6
5
Figure A