GReddy AIR INTAKE SYSTEMS: Honda Accord 4cyl. 2008-12 - Manual (Page 2)

Install MAF sensor to intake tube using provided M4
screws.
10
Install air filter to intake tube and tighten using 5/16” nut
driver.
11
Install elbow coupler to throttle body and position
using clamps provided. Do not tighten.
12
Install provided 5/8” hose to engine and tube.
Re-connect MAF sensor harness and battery
terminals.
16
The installation of your Greddy Performance intake is
now complete. Please check all components and re-
tighten if necessary. Thank you for choosing Greddy!
17
Install intake tube assembly into vehicle and position.
13
Using isolation mount provided, secure to vehicle and
postion tab on tube to isolation mount. Tighten using
the washer and nut provided with 10mm socket or
wrench.
14
Position and tighten clamps on tube using 5/16” nut
driver.
15
Replacement Filter P/N:
61-90131
Note: Filter Cleaning: When cleaning your TM
filter, be sure to use only “Restore Kit”
(P/N: TP-7015C TM cleaner only.)
TM cleaning:
see cleaning instruction sheet TF-9000I.
GReddy Performance Products
9 Vanderbilt, Irvine CA 92618
T: 949.588.8300 F: 949.588.6318
[email protected]
www.greddy.com
06-80500 Pg2
Accessories