GReddy AIR INTAKE SYSTEMS: Mitsubishi EvoX 2008-12 - Manual (Page 2)

With provided washer and screw tighten down housing
using 10mm socket or wrench.
10
Remove MAF sensor from air box using 10mm socket
or wrench.
11
Install MAF sensor back to intake tube.
12
Install air filter and tighten using 5/16” nut driver.
16
Re-connect MAF sensor harness. Tighten intake clamp
using 10mm socket or wrench.
17
The installation of your Greddy Performance intake is
now complete. Please check all components and re-
tighten if necessary. Thank you for choosing Greddy!
18
Attach couplers with clamps to intake tube.
13
Install and position intake tube assembly to MAF
sensor and adaptor.
14
Tighten clamps using 5/16” nut driver.
15
Replacement Filter P/N:
61-90133
06-80502 Pg2
Accessories
Note: Filter Cleaning: When cleaning your TM
filter, be sure to use only “Restore Kit”
(P/N: TP-7015C TM cleaner only.)
TM cleaning:
see cleaning instruction sheet TF-9000I.
GReddy Performance Products
9 Vanderbilt, Irvine CA 92618
T: 949.588.8300 F: 949.588.6318
[email protected]
www.greddy.com