GReddy TURBO RELATED: Hyundai Genesis Coupe 2.0T 2010 / BOV Kit BRS-HGC20 - Manual (Page 6)

(4) Install the One Way Valve (#10) inline with the OEM relief valve and solenoid. Cut the hose
and insert the One Way Valve, making sure that it restricts the airflow to the relief valve.
Make sure the arrow on the One Way Valve points toward the OEM relief valve. Before
cutting, be sure you have the correct hose.
How to change the Attachment
The attachment on the GReddy Type RS is interchangeable with discharge funnel or hose
attachment.
To remove the attachment, turn it counter clock wise, and to instell turn it clock wise.
When changing the attachment, place the O-ring onto the attachment being installed and
tighten until the attachment flange meets the blow off valve of body.
Apply silicone grease before reinstalling the O-ring.
O-ring will not require excessive force to seal properly, so please be careful not to
orver tighten the attachment.
This completes the BOV Kit installation.
No.10