GReddy TURBO RELATED: Mazda RX7 1987-92 / BOV kit BRS-501 FC3S - Manual (Page 5)

－ 5－
(2) Install the GReddy Blow Off Valve
to the adapter using the provided
gasket.
(3) Install the adapter assembly to the factory
air hose using the factory hose band.
(4) Connect the provided vacuum hose‹№4›
to the pressure source on the intake
manifold using the provided three way
fitting‹№5›
※ Make sure to connect to a pressure source
on the intake manifold after the throttle
body.
(5) Place the emblem ‹ № 7 › on the top
housing.
« « « «８９ ８９ ８９ ８９ and later models and later models and later models and later models» » » »
Connect the factory vacuum hose for the
factory air bypass valve to the GReddy Blow
Off Valve and plug the intake pipe with the
provided plug‹№3› as shown.
Vacuum hose
‹№3›
89 and later models 89 and later models 89 and later models 89 and later models
‹№8›
‹№2›