GReddy TURBO RELATED: Mitsubishi Evolution 2003-07 / BOV Kit BRS-313 CT9A - Manual (Page 6)

－ 6－
(6) Install the adaptor pipe using factory air
hose and connect the 22Φ side of tube
into the air control valve hose.
※ Please install using factory hose band.
(7) Connect the ‹№4›６φ vacuum hose to
the air tube that was connected on
vacuum hose (factory air bypass valve) and
connect the other end to the top cover
part of the Blow Off Valve (６φ union).
※ Make sure that the ６ φ vacuum hose
goes under the radiator upper hose and it
does not interrupt radiator fan or exhaust
manifold.
Please use the ‹№5›zip tie to hold it.
(8) Paste the ‹№7›emblem on the top cover.
(9) Install and connect the battery back.
Place back the air duct.
※ If the air duct may interfere the adaptor
pipe, please adjust the adaptor pipe’s
position
‹№4›
Air Hose
Air Control Valve Hose