Flaming River Nova Front Steer Power Rack and Pinion Cradle Kits 1962-67 - Manual (Page 2)

Page 1 of 11
012710
JJ/RD/RP/BC
INDEX
NOTE: Before beginning you must first measure the width of your front end from LEFT outer tie rod end zirc to the
RIGHT outer tie rod end zirc to determine the overall width of your front end. Write dimension here for further reference
NOTE: Part number ES381RL 68-69 Camaro Outer Tie Rod Ends must be used
with this rack and pinion kit.
Parts Inventory PG 3
Original Steering System Removal PG 4 - 5
Installation of New Flaming River Tilt Column PG 5
Electrical System Notes PG 6
Installation of Rack and Cradle PG 7
Universal Joint and Steering Shaft Installation PG 8
Steering Wheel Installation PG 9
Power Steering Bleeding Procedure PG 10
Power Steering Valve Diagram PG 10
Torque Specs PG 10
Note: For safety disconnect battery cables and ensure that vehicle is properly supported by jack stands.
We recommend a professional alignment to set the proper alignment settings after system installation.
We recommend that you always install new outer tie rod ends when installing this kit.
WARRANTY DISCLAIMER: Flaming River’s® Limited Warranty
Flaming River® warrants its products to be free from defects in material and workmanship for a period of one (1) year after the date
of purchase, except that: All steering columns are warranted for a period of three (3) years from the date of purchase. Flaming
River’s® warranty liability is limited to the replacement of defective products. Flaming River® is not liable for any labor costs
associated with any warranty claim, or for any incidental or consequential damages. Improper installation, abuse, racing, and/or
modification of the products voids this warranty. No warranty of merchantability or fitness for a particular purpose is made by
Flaming River® with respect to any of its products. Warnings and Recommendations It is the customer’s responsibility to determine
the suitability of a given Flaming River® product for the customer’s uses. Likewise, it is the customer’s responsibility to install a
Flaming River® product. Contact the vehicle manufacturer whenever installing a switch to confirm the appropriateness of using
such a switch and the recommended placement of the switch on the vehicle. Use qualified chassis specialists for the installation of
all steering related components. Be aware that the installation of certain Flaming River® products may adversely impact a
manufacturer’s warranty with respect to certain vehicles and other manufactured goods. Flaming River will repair or replace any
product found to be defective in material or workmanship. Improper installation, abuse, racing and/or modification VOID
WARRANTY. Flaming River® is not responsible for any labor costs associated with any warranty.