beautypg.com

Flaming River Nova Front Steer Power Rack and Pinion Cradle Kits 1962-67 User Manual

Page 10

background image

Page 9 of 11

012710

JJ/RD/RP/BC

Steering Wheel Installation

1) Install horn contact kit into canceling cam tube and turn to lock.

2) Align steering wheel adapter so that the canceling cam hole is at approx the 11 O’clock position and that one of the

steering wheel mounting holes is at the 12 O’clock position.

3) To install the wheel adapter run the horn contact wire through the hole for the canceling cam and place the adapter

on to the splined column shaft.

4) Tighten the adapter-retaining nut until the adapter is approximately 1/16” away from the column shroud.