DAVIS DriveRight Palm Download Kit Manual (8181) - Manual (Page 3)

Downloading Data to Palm Page 3
Downloading Data to Palm
Use the following instructions to download trip data from a DriveRight device
to a Palm PDA.
Note: Each download to the Palm will automatically be stored in a new database file. The
files are named “DRDB-#”, and are numbered sequentially for each download.
1. Referring to the illustration, use the supplied 9-pin cable adapter, your Palm
serial cable, and the DriveRight download cable to connect your Palm to the
DriveRight. You may have either a molded one-piece download cable or a
three-piece download cable, both of which are shown below.
2. Open the Palm Launch window and tap on the DriveRight icon .
3. Tap DriveRight in the title area at the top of the screen.
4. Tap Download in the drop-down File menu. The Download window shows
download status as the data is transferred to the Palm.
5. When you see the Download Complete message, tap OK to return to the
Palm DriveRight main window.
Palm Pilot
Serial Port
Cable
9-Pin
Cable Adapter
DriveRight Device
Molded One-Piece
Download Cable
Serial Port
Connector
Hardware
Module DriveRight
Connector
Three-Piece
Download Cable
Palm PDA to DriveRight Device Connection