DAVIS CarChip Fleet Pro Instruction Manual (8246) - Manual (Page 3)

Installing CarChip in a Vehicle
3
The OBDII port will be located within 3 feet of the steering wheel within or
near the general area indicated by the dotted line in the illustration below. The
port should be easily accessible to a person in the driver's seat.
If you have trouble finding the OBDII port, check the following areas:
• Under the dash
• In front of the passenger seat
• Behind the ash tray
• Behind a small access panel in the dash
• In or around the center console
2. Plug CarChip into the OBDII port checking to make sure the indicator light
blinks when first connected.
Note: If the indicator light is enabled, which is its default setting, it continuously blinks when
connected to a vehicle. If the indicator is disabled, it stops blinking once is has
established communication with the OBDII computer.
OBD II Port
OBD II
Connector
CarChip
Fleet Pro
Data Logger