Anthem AVM 50 - Manual (Page 79)

71
4. OPERATION
continued …
OUTPUT
The Output menu is used to select gamma correction and to turn frame lock on/off.
Gamma Correction (normally for use only by calibration specialists)
The default is Off. Curves other than exponential (default 100) are created with a computer – see section 3.1.
Frame Lock
The default is Off. Frame Lock is useful with video games by cutting processing time. When Auto is selected,
buffering is disabled and the processor’s output synchronizes with the source.
If your display accepts various refresh rates and your disc player has passthrough mode, you can also use
Frame Lock to match refresh rate to the source material (24 Hz / 50 Hz / 60 Hz), overriding the refresh rate
selected in menu 1. Engaging Frame Lock increases source switching time, therefore it should not be used
if not needed – assigning different video output configurations in menu 1 is more effective in this case.
“Auto” means that if the source has a nature that prevents Frame Lock from engaging, it will not engage.
SCALE OUT PICTURE CROP INPUT PATTERNS INFO OUTPUT
Gamma Corr Exponential
Gamma Corr Custom Singl
Gamma Corr Custom RGB
Gamma Corr Off
Frame Lock