Setup menu, Continued – Anthem AVM 20 v2 User Manual

Page 71

Example 2: Restore Installer Settings.

Note: FM • AM Tuner presets that were saved in INSTALLER SETTINGS will also be restored.

• Enter the Setup (section 7.1). Go to ‘11. SAVE/RESTORE SETTINGS’ and press SELECT.

• Press the

button until you reach ‘d. RESTORE INSTALLER SET’NS’.

• Press SELECT. You will be asked to confirm that you want to restore installer settings.

• Use the

buttons to change to ‘Yes’ and press SELECT. On-Screen display message will then say

‘Saving Successful’, the Front Panel display will say ‘Done!’.

• When finished, press

to go to another menu item, or...

• Press BACK to leave the submenu and return to the main menu.

Example 3: Reload Factory Defaults.

Note: The current time and FM • AM Tuner presets will be retained. Surround mode level, balance,

bass/treble adjustments (sections 5.6 and 5.7), and Modes (section 5.8) will be reset to +0.0 dB.

• Enter the Setup (section 7.1). Go to ‘11. SAVE/RESTORE SETTINGS’ and press SELECT.

• Press the

button until you reach ‘e. RELOAD FACTORY DEFAULTS’.

• Press SELECT. You will be asked to confirm that you want to ‘reload factory settings’.