beautypg.com

Using the installer – Allied Telesis AT-2872SX User Manual

Page 35

background image

AT-2872SX ExpressCard Fast Ethernet Fiber Module Installation and User’s Guide

35

Note

A network device driver must be physically installed before the
Broadcom NetXtreme II Controller can be used with your Windows
operating system. There is no installation CD. You must download
the drivers.

Note

Allied Telesis recommends that you not perform hot insertions or hot
removal when the OS is up and running, We recommend that you
insert or remover the adapter only when the system is powered
down.

Using the

Installer

The Installer is a graphical interactive installation mode. To install the AT-
2872SX driver on a Windows Operating System, do the following:

1. When the Found New Hardware Wizard appears, click Cancel.

See Figure 8.

Figure 8. Found New Hardware Wizard Page