Allied Telesis AT-2872SX - Manual (Page 22)

Chapter 2: Installing the Hardware
22
Reviewing Safety Precautions
Please review the following safety precautions before you begin to install
the switch or any of its components. The
indicates that a translation of
the safety statements is available in a PDF document titled “Translated
Safety Statements”. This other product documentation is posted on the
Allied Telesis website at http://www.alliedtelesis.com/support/
software/. Refer to “Where to Find Web-based Documentation and
Drivers” on page 13 to navigate to this document.
Warning
This is a “Class 1 LED product”. L1
Warning
Do not stare into the laser beam. L2
Warning
The fiber optic ports contain a Class 1 laser device. When the ports
are disconnected, always cover them with the provided plug.
Exposed ports may cause skin or eye damage. L4
Warning
Do not work on this equipment or cables during periods of lightning
activity. E2
Warning
Operating Temperature: This product is designed for a maximum
ambient temperature of 40 degrees C. E7
Warning
All Countries: Install this product in accordance with local and
National Electric Codes. E8
Warning
Do not look directly at the fiber optic cable ends or inspect the cable
ends with an optical lens. E29