beautypg.com

Pre-installation checklist – Allied Telesis AT-2872SX User Manual

Page 24

background image

Chapter 2: Installing the Hardware

24

Pre-Installation Checklist

Before you install the module, check the following list:

1. Verify that your laptop is using the latest BIOS.

If you downloaded the module software from the Allied Telesis support
website, record the path to where the module driver files reside on
your system.

2. If your laptop is active, shut it down.

3. When the system shut down is complete, power OFF and unplug your

system.

4. Holding the module by the edges, remove it from its shipping package

and place it on an antistatic surface.

5. Check the module for visible signs of damage, particularly on the edge

connector.

Caution

Do not attempt to install a damaged module. If the module is
damaged, report it to Allied Telesis. See “Contacting Allied Telesis”
on page 14.