Telenav for Sprint Supported Devices: v5.1 for Sanyo Katana; Motorola RAZR, KRZR User Manual

Page 7

The left softkey performs the function directly above it on the menu bar at the bottom of the
screen. The left softkey is typically used to go Back one screen, Close a screen, or Exit the
application. In the illustration below, the left softkey takes you back to the previous screen (the
TeleNav GPS Navigator Main Menu).

Right softkey

The key in the upper right corner of the keypad with the dash (“–”). The right softkey performs
the function directly above it on the menu bar at the bottom of the screen.

The right softkey is typically used as Yes or Go (usually the same as pressing the OK button),
although sometimes it opens a special menu or puts the keypad in a different mode. For
example, the right softkey switches you between alpha and numeric modes when you type
information in a text field. In the illustration above, the right softkey executes the Go command
and takes you to the My Favorites screen.

Back button The

Back button is located below the right softkey. For consistency throughout the TeleNav

GPS Navigator application, consider using the left softkey instead of the Back button to go back
to the previous screen. The Back button is normally only used to delete entries in a text field.

OK button The

Menu/OK button in the center of the circular navigation key.

Navigation keys The circular navigation key that surrounds the OK button. The navigation key has four possible

choices—left, right, up, and down. These are referred to as the left navigation key, the right
navigation key, the up navigation key, and the down navigation key.

PAGE 7 OF 54