Telenav for Nextel Supported Devices: v3.0 for Motorola i860 User Manual

Page 12

PAGE 12 OF 34

The next screen will collect your TeleNav account number and the PIN you provided when
registering for TeleNav services at

www.telenav.com

. Your account number MUST be the

same as your Nextel phone number with area code so that when you call the Voice
Address Input System you will not need to type in the account number. After you have
entered the account number, use the 4-way Navigation Key to move the cursor down to the
PIN entry field. When you have finished entering your PIN, press the OK soft key to
proceed.

NOTE: If after you press OK, the TeleNav application indicates that it cannot reach the TeleNav servers, the most
likely reason is that your Nextel Total Connect packet data service plan is not yet active. If the application reaches
the TeleNav servers, the server will cause your phone to remember the account information so that you will not
need to enter it again.

NOTE: If your TeleNav account is expired, you will be notified at this point, and will be directed to go to
www.telenav.com to extend your service agreement. You will not be able to progress beyond this point until your
account is returned to current status. You may also see an important message from TeleNav regarding upgrades,
scheduled downtime, pending account expiration, etc.

Initial Content Loading

During your first time use of TeleNav subscription services, it will be necessary for
the handset to obtain the audible and graphical content needed to build the
displays and produce the audible messages you will hear. The following Alert
screen will advise you this is about to take place.

Press Done to start the content download and installation process.

From time to time, TeleNav may update this content, and will advise you
accordingly.

TeleNav Main Menu

After the application launches, you will be taken to the TeleNav main menu.
This menu packages the free basic services under GPS Tools. Except for
Preferences, the rest of the services require a TeleNav subscription, and Nextel
Total Connect packet data service. Highlight your choice, and press OK.

NOTE: You can only EXIT TeleNav from this menu screen. If you are
elsewhere in the TeleNav application, press BACK until you see this screen, or
press MENU, and select TeleNav Home to return to this screen. To avoid
inadvertently leaving TeleNav, you must confirm your desire to exit by pressing
YES on the exit confirmation screen.

The drawings of the phone screens in this document are not proportional to the actual screens on the i860. Instead, they were captured from

an i730 emulator with different screen proportions ore were drawn taller or shorter to allow the presented content to be shown completely.