Ridetech 41232000 - Manual (Page 4)

12. Reinstall the door bars. Drop two
3/8” x 1 ¾” bolts down through the
outer two holes. The reinforcement
plate will be installed under the car
(it’s the one with a handle on it to aid
installation). The inner two bolts will
use 3/8” x 1 ¼” bolts, flat washers
and Nylok nuts.
13. Since the door bar covers the
factory lap belt mounting holes, tabs
are welded to the bar to secure the
lap belts. 3/8” x 1 ½” bolts are
supplied.
14. All clamps and bolts may now be
tightened.
Installation Complete!