PowerTap SL 2.4 - Manual (Page 16)

The middle level of the main display shows current, max, and average speed readings.
1) Press [MODE] to scroll the cursor to the middle line of the main display.
2) Press [SELECT] to toggle through the speed function options.
Current Speed
Speed is displayed in either miles per hour (MI) or kilometers per hour (KM) up to
99.9 mi/hr or km/hr in 0.1 mi/hr or km/hr increments. Current speed readings are
displayed when only “MI” or “KM” appears below the middle line. (FIGURE 13)
Maximum Speed
Either “MI” or “KM” and “MX” displayed simultaneously indicate the highest record-
ed speed since the last time data was cleared in trip mode or the selected interval
in interval mode. (FIGURE 14)
Average Speed
Either “MI” or “KM” and “AVG” displayed simultaneously indicate the average
recorded speed since the last time data was cleared in trip mode or the selected interval in inter-
val mode. (FIGURE 15)
MULTI-FUNCTION DISPLAY
16
365
25
58.I0
WATTS
3
D
365
33
58.I0
WATTS
7
D
365
20
58.I0
3
D
WATTS
FIGURE 13
FIGURE 14
FIGURE 15